As part of its GAIA integrated program of environmental sustainability, Sayerlack and Movac continue to launch new high technology coatings providing not only reduced impact on the environment but clear benefits to the end user.
Part of this initiative is the Sayerlack Earth range of coatings. These innovative, ready-to-use, high dry residue products have a low volatile organic compound content as they do not need to be diluted.
June 2019 sees Movac launch three of these Sayerlack A + B coatings – there is no need for any thinner to be used – to the UK marketplace, giving their customers significant solvent reduction over conventional systems.
TU0276/13 is a white high solid polyurethane primer which exhibits good hiding power even on sharp edges, good vertical hold and excellent sandability, making it the easy to use optimum base for any Sayerlack topcoat paint system.
The other two new A + B coatings form part of the new GAIA high performance clear system they are:
TU0137/00 is a clear polyurethane thixotropic basecoat with excellent vertical hold and pore wetting which is easy to sand and gives exceptional build. If pre-colouring of the timber is required it may be used over any of the Sayerlack ranges of stains including the water based stain systems to further reduce solvent emissions.
TZ64**/00 is a family of clear polyurethane lacquers with gloss levels from 5-80% with high filling power and even matting designed to overcoat the TU0137/00 basecoat.
Both products use the same hardener TH0779/00 mixed at a 2:1 ratio and are then ready to apply without thinning to obtain an exceptional finish.
Applied at a film weight 20-30% lower than conventional products this not only gives the benefit of further reductions in solvent emissions but means less product needs to be purchased saving Movac customers in material costs.
These are just a selection of the exciting products from the new range of Sayerlack coatings, for more information on these or a host of new technology products contact Movac Group.
0844 561 0070