In stock at Ostermann: edgings to match the new surfaces of the Bloom Collection by Arpa Fenix NTM
.
Extremely matt surfaces make an elegant impression and are currently popular in kitchen, bathroom and home furnishings. For a perfect impression even on the narrow surfaces of furniture boards, Ostermann offers a growing selection of edgings with an “Excellent Matt” surface finish.
As with high gloss surfaces, super matt and extremely matt edgings also require a very precise matching in terms of colour and gloss level. After all, board and edging are supposed to look as if they were made from a single piece.
To give furniture makers as much leeway as possible in their selection of possible colours, Ostermann offers matching edgings of the highest quality for all common matt surfaces, and sells them from small quantities of only 1m.
Ostermann delivers a great diversity of furniture edgings with cutting-edge matt finishes directly from stock. In this picture you see a selection of extremely matt trend edgings in grey shades
One example: Grey
The lustreless surface finish gives the otherwise admittedly rather unspectacular colour a very noble and exclusive appearance. Yet, grey and grey is not the same. There are, for example, almost 40 different shades of grey in the RAL classic colour scale.
The diversity of nuances is naturally also reflected in the available board surfaces, and thus in the Ostermann range. Depending on the gloss level of the board, Ostermann provides more than 40 different grey edgings with an excellent matt (gloss level smaller than three) or super matt (gloss level smaller than seven) surface finish.
New colours at Arpa Fenix
Ever since the booming success of the Fenix NTM Bloom Collection we can be sure: new colours from this collection set trends worldwide. You could not find any kitchen on the market in colours such as matt dark green, warm red or corn yellow until recently. Today, these colours represent exquisite Italian design and have found their way into many board collections.
But Arpa Industriale is already one step ahead. Six new colours have just been introduced by the company, for which Ostermann once again has the perfectly matching edgings in stock. The edgings impress with an extremely matt surface and are available in standard dimensions of 23, 33, 43 and 100 by 1mm.
New colours with trend potential
Once again, the new Fenix colours are exceptional, and their extremely matt finish gives them their very own, elegant look. The same is true of the matching edgings, all of which have been sampled by Ostermann with an “Excellent Matt” finish. The Viola Orissa edging shows a dark purple hue, reminiscent of the intense colour of an aubergine. Just not glossy, but extremely matt. The second shade of red - Rosso Namib - is reminiscent of red sand, brick or clay, and endows furniture with a warm touch. The relatively neutral shade of the edging Giallo Evora can best be described as warm sand-coloured and can – according to the Ostermann experts’ recommendation - be perfectly combined with one of the two previously mentioned shades.
An original home office solution
Blue, Green, Grey – familiar yet new
The three other new Ostermann edgings Blu Shaba, Verde Kitami and Grigio Aragona cover the blue-green and grey colour spectrum.
They all have in common a muted appearance with striking grey elements. Blu Shaba is a very calm and dark shade of blue that tends towards grey and also has greenish components. The green of Verde Kitami is much lighter, very neutral, and less luminous than that of the Verde Brac edging, which has been on the market for a while.
An ideal companion for the two edgings – according to the unanimous opinion of Ostermann experts – is the last of the six new colours: Grigio Aragona. The shade ranges between grey and brown and is reminiscent of the mineral mud used for health applications.
A tip from the Ostermann experts
All Ostermann edgings with an “Excellent Matt” surface are shipped with a protective film. To easily remove these from the edgings, use the REDOCOL protective film remover, a useful little tool from the Ostermann range. It has a soft, rubberised layer on the underside, which quickly detaches the film and facilitates its removal.
Ostermann provides furniture makers with a wide selection of plain-coloured edgings with a matt surface finish.
Another tip: fronts made to measure
In addition to the perfectly matching edgings, the new Fenix surfaces are of course also available from Ostermann as, e.g., ready-made furniture elements. You can design and order them online in the Ostermann configuration tool.
How do I find the right edging?
Ostermann stands for a particularly diverse range and the best service for the trade. Finding an edging for a board is quite an easy task, because the experts in edging have already referenced perfectly matching edgings to all furniture boards in their online shop.
If you type in the board number or board name into the search field at the starting page, you will automatically be shown the complete name of the board and below it the Ostermann recommendation for matching edgings.
If you need other than standard dimensions, the edging specialist will cut the edgings to any desired width. You can also obtain any edging with a hotmelt adhesive coating or with an individually chosen functional layer for zero bondline technologies. The highly trained staff is happy to help with questions on the right choice or processing.
Furniture makers will also find all information on these edgings by typing in the search term “#Highlights04” on the Ostermann website.
