Swiss-built Striebig vertical panel saws, also known as wall saws, continue to be the most popular choice for panel processors.
Striebig’s portfolio consists of five machine series catering for all sizing needs; the entry-level Compact, the Standard, the Evolution, the Control and the latest 4D sawing centre.
All models, apart from the 4D, are available in no less than nine sizes with an extensive selection of options available to improve their effectiveness still further. Machines can also be built in special sizes and fitted with specialist equipment to suit individual requirements.
The entry-level Compact series, with a cutting range 3100 x1644 x 80mm to 5350 x 2220 x 80mm, includes an automated cut cycle version, the Compact AV, to make them even more productive.
The popular Standard series – which has been tried and tested over decades – comes in cutting sizes 3300 x 1680 x 80mm to 5300 x 2240x 80mm, and is the perfect saw for companies of all sizes.
The fully-automatic Control series offers an optional electronic positioning system (EPS) on both axes for the automatic positioning of both the length stop and saw head. This increases the saws’ productivity by delivering automatic repeat strip and upper trim cutting.
With manual feeding of the saw unit eliminated the operator’s job is made easier, giving him ample time to prepare the next job. Numerous procedures are carried out at the press of a button, including locking and releasing the beam saw, setting the horizontal cutting height, plunging and swivelling the motor, locking the support rollers during sawing and fine saw blade adjustment.
Where high levels of panel throughput are needed, the Control and the Evolution, with cutting sizes from 3300 x 1680mm to 5300 x 2240mm, offer an optional 100mm cutting depth. The Evolution has many similar features to the Control, making it one of the most advanced manual panel saws available.
Striebig’s latest 4D high-end sawing centre machine can optimize and cut a full panel without the operator needing to re-handle it once it is loaded. It’s the world’s first vertical panel saw to offer intelligent cut optimization, even for the most complicated panel and strip cutting work.
Delivering a cutting range of 5300 x 2100mm, the Striebig 4D comes with the option for cut depths of 80, 105 or 130mm.
Striebig saws are suitable for cutting practically all sheet materials, including MDF, plaster board, plastics and aluminium panels. They offer impressive dust limit values well below 1mg/m3.
Striebig saws are available from sole UK sales agent, TM Machinery Sales. Alongside machine sales and installations, sister company T M Services & Spares repairs and maintains a wide range of woodworking machinery, including every type of saws.